Your direct contact to us

(Mon-Fri 08:00 - 17:00 hrs)

+49 (89) 264860-0



    Where to use

    The ICT42S G2 Module is a hybrid Module which combines 2 channels from the advanced ICP42S G2 Module with 2 advanced tacho input channels. The tacho channels provide tacho period measurements with a 14 ns resolution, sampled where the signal intersects its trigger level settings. Triggering of tacho signals can be set for rising or falling edges with adjustable hysteresis whilst additionally providing AC coupling for sensors with varying DC voltage offsets. A high speed 4.9 MSa/s scope mode is provided to view the tacho signals in order to assist with the definition of trigger levels.

    • When measuring the pulse rate and time between pulses such as rpm and crank angle
    • With any ICP® based sensor commonly used to measure vibration, acceleration, force or pressure
    • With any voltage source up to ±60 V in voltage input mode


    ICP® channels

    • See ICP42S G2 for more details of the 2 ICP® or voltage input mode channels

    Tacho channels

    • 2 tacho channels
    • Tacho input can be DC/AC coupled
    • 14 ns tacho resolution
    • 1 MPulse/s rate for the sum of the 2 tacho channels when used with the SC42S G2
    • 16-bit tacho trigger level adjustment
    • ±(60 V, 30 V, 12 V and 2 V) input ranges
    • 2 MHz analog bandwidth for all input ranges
    • Adjustable trigger level hysteresis (Schmitt trigger implementation)
    • Triggering on the n’th edge
    • Tacho trigger level self-calibration
    • Scope mode for each tacho channel, sampled at 4.9 MSa/s
    • ±12 V or 12 V voltage excitation output to tacho sensor
    • Lemo 4-way EHG.0B connectors