Ihr direkter Kontakt zu uns

(Mo-Fr 08:00 - 17:00 Uhr)

+49 (89) 264860-0


CAN42 G2


    Where to use

    The CAN42 G2 Module provides interfaces to 2 independent Controller Area Networks or CAN. Messages received from CAN are time-stamped to synchronize their reception with analog and digital measurements from other Modules in the system. Fully implemented features include Listen-Only mode, Self-Reception of CAN messages and transmission of Remote Frames. The CAN42 G2 Module provides independent channel filtering.

    • When monitoring CAN based messages
    • When controlling CAN based devices


    • 2 independent CAN channels each at 10 kbit/s to 1 Mbit/s data rate
    • Compatible with ISO 11898-2 (High Speed) physical layer standard and with CAN 2.0B protocol (supports both 11-bit and 29-bit identifiers)
    • 3 modes of operation:
      • Operational – transmit and receive CAN messages (active)
      • Listen only mode – only receive CAN messages (passive)
      • CAN bus simulator mode – simulates receiving CAN messages from CAN (no physical connection needed)
    • CAN messages are time stamped with a resolution of 62.5 ns
    • Individually configurable identifier list per channel provides acceptance filtering
    • Data and remote frames are supported
    • Software selectable 120 Ω termination per channel
    • Lemo 7-way EHG.0B connectors
    • 9-way D-sub connectors are provided with FLXB20 SubModules